>10/100Mbps adaptive, (Auto MDI/MDI-X)
>Supports IEEE802.3/802.3u/802.3x
>Support for broadcast storm protection
>Supporting working environment: -20~70 ℃
>5/8/16 port entry-level non managed Ethernet switch rail installation
>ODOT-MS105T: 5-port 10/100Mbps, 35mm rail installation
>ODOT-MS108T: 8-port 10/100Mbps, 35mm rail installation
>ODOT-MS116T: 16 port 10/100Mbps, 35mm rail installation
Ordering code | 00S108 |
Part number | FAS-MS108T |
Support | IEEE 802.3/802.3x/802.3u |
Input voltage | 2 channels 9~36V DC |
Install | 35mm standard rail installation |
MAC address | 16K |
Support | Auto-negotiation 10/100Mbps, half/full duplex, Auto MDI/MDIX |
Operating temperature | -20~70 ℃ |
Working humidity | 5~90% (No condensation) |
Support | Broadcast Storm Protection |
Support | Anti-reverse protection |
Warranty | Three years |
Store and forward | |
IEEE 802.3 | 10BaseT |
IEEE 802.3u | 100BaseT(X) |
IEEE 802.3x | Flow Control |
Processing type | Store and forward |
Switch properties | |
MAC address table size | 2K |
Packet buffer size | 512 bit |
Interface | RJ45 port: 10/100BaseT(X) automatic detection, MID/MDIX adaptive |
Working conditions | Temperature: -20~85 ℃, Humidity: 5~90% (No condensation) |
Storage conditions | Temperature: -55~125 ℃, Humidity: 5~90% (No condensation) |
Power supply | 9V~36V DC(24V recommended) |
Overcurrent protection | 1.25 A |
Reverse polarity protection | Support reverse polarity protection |
Electrical parameters | |
Operating Voltage | 9~36V DC |
Operating temperature | -40~85 ℃ |
Storage temperature | -55~125℃ |
Overcurrent protection | 1.25A |
Overall power consumption | 300mA@24V |
Working humidity | 5~95%(No condensation) |
Warranty period | Three years |
ESD | 2KV |
FAS-MS108T Wiring Instructions | |
Interface number / Wiring identification | Wiring Instructions |
1 / PE | Protected area (earth) |
2 / V- | Power input negative |
3 / V+ | Power input positive |
FAS-MS108T indicator light description | |
Logo / State | Meaning |
PWR 1 / Steady red light | Power supply 1 is normal |
PWR 1 / Red light off | The power supply of power supply 1 is abnormal |
PWR 2 / Steady red light | Power supply 2 is normal |
PWR 2 / Red light off | The power supply of power supply 2 is abnormal |