Home
Product
Industrial Network
IO-Link Master
IO-Link device
IO-Link M8 Hub
。
IO-Link M12 Hub
。
IO-Link IP20 Hub
。
IO-Link Analog Hub
。
IO-Link Analog adapter
。
IO-Link Valve island adapter
。
Multiprotocol I/O module
This multi-protocol bus module enables one device to be seamlessly compatible with multiple industrial Ethernet protocols, including but not limited to Profinet, Ethernet/IP, CC-Link IEF Basic and Modbus TCP. This means that no matter how complex your application scenario is, you can handle it with ease! Secondly, in order to ensure that the product can operate stably in various environments, we have specially designed M8 and M12 interfaces with IP67 protection level, as well as IP20 protection level suitable for installation in cabinets. This design undoubtedly greatly improves the reliability and stability of the product, making you feel more at ease when using it!
PROFINET I/O module
Profinet bus module. In order to ensure its excellent performance, we put the safety and reliability of the product first at the beginning of the design, and adopted unique dust-proof and waterproof technology to give the hardware equipment strong anti-interference ability and ultra-high safety protection level - M8 and M12 interfaces with IP67 protection level, and IP20 protection level suitable for installation in cabinets.
EtherCAT I/O module
Profibus-DP I/O module
Profibus-DP bus module. In order to ensure its excellent performance, we put the safety and reliability of the product first at the beginning of the design, and adopted unique dustproof and waterproof technology to give the hardware equipment strong anti-interference ability and ultra-high safety protection level - IP67 protection level M8 and M12 interfaces.
Modbus-RTU I/O module
Modbus-RTU bus module. In order to ensure its excellent performance, we put the safety and reliability of the product first at the beginning of the design. We also adopted unique dust-proof and waterproof technology to give the hardware equipment a strong anti-interference ability and an IP20 protection level suitable for installation inside the cabinet.
Industrial switch
enIP20交换机
。
enIP67交换机
。
enFFC系列刀片式模块
en总线耦合器
。
enI/O 模块
。
enIP20网络模块
en多协议网络模块端子式
。
enEtherCAT 网络模块端子式
。
enPROFINET 网络模块端子式
。
enModbus-RTU 网络模块端子式
。
enCC-Link 网络模块端子式
。
enRFID
enIO-Link RFID读卡器
。
enModbus-RTU RFID读卡器
。
enRFID标签
。
Pneumatic tech
Valve Island
IO-Link communication valve island
。
Modbus-RTU communication valve island
。
Multi-protocol communication valve island
。
D-Sub communication valve island
。
The Solenoid valve
In-line valve
。
Semi-pipe valve
。
Plate valve
。
Communication modules
IO-Link communication modules
。
Multi-protocol communication modules
。
EtherCAT communication modules
。
Profibus-DP communication modules
。
Modbus-RTU communication modules
。
D-Sub communication modules
。
CC-Link communication modules
。
Valve island accessories
Gas pipe joint
。
Silencer
。
Plug
。
Blind plate
。
Air source board
。
Isolator
。
Manifold
。
Magnetic sensor
C-slot-magnetic sensor
。
T-slot-magnetic sensor
。
J-slot-magnetic sensor
。
Magnetic sensor mounting accessories
。
Electric and Pneumatic
en阀与阀组
en气路板
。
en附件
。
en标准阀岛
en阀
。
en附件
。
en组合式阀岛
en阀岛通信模块
。
en阀
。
en阀岛附件
。
en非标阀岛
en阀岛
。
en阀岛附件
。
en比例阀
Connection Tech
M8 signal junction box
Integrated junction box
The M8 junction box can integrate the scattered IO points of various devices into a unified integrated junction box, and manage the connection and management of the control system through a multi-core cable to facilitate management and line arrangement. In order to ensure a clear display of the equipment's operating status, the M8 junction box is equipped with an LED display, allowing users to obtain equipment operating data intuitively and quickly. We are convinced that this M8 distributor will become your first choice for equipment operation and maintenance. The integrated junction box can be produced with cables according to the length of on-site wiring. The cables have flexible and fixed installation options, and the length can also be customized as needed.。
Split junction box
The M8 junction box can centralize the scattered IO points of various types of equipment and use multi-core cables for connection management of the control system, which facilitates management and line arrangement. In order to clearly display the operating status of the equipment, the M8 junction box is equipped with an LED display so that users can quickly obtain equipment operating data. We believe that this M8 dispenser will become your first choice for equipment operation and maintenance. The split junction box can be separated from the integrated multi-core cable according to the on-site wiring environment or the need for quick component replacement, and the signal connection is realized through docking and locking.。
M12 signal junction box
M23 interface junction box
The M12 junction box can concentrate the scattered IO points of various types of equipment and use multi-core cables to manage the connection of the control system, which facilitates management and line arrangement. In order to clearly display the operating status of the equipment, the M12 junction box is equipped with an LED display so that users can quickly obtain equipment operating data. We believe that this M12 distributor will become your first choice for equipment operation and maintenance. The split junction box can be separated from the integrated multi-core cable according to the on-site wiring environment or the need for quick component replacement, and the signal connection is realized through docking and locking. This product uses the M23 interface connection method for the split interface. Compared with the traditional split structure, it has higher connection stability and protection.。
Integrated junction box
The M12 junction box can integrate the scattered IO points of various devices into a unified integrated junction box, and manage the connection and management of the control system through a multi-core cable to facilitate management and line arrangement. In order to ensure a clear display of the equipment's operating status, the M12 junction box is equipped with an LED display, allowing users to obtain equipment operating data intuitively and quickly. We are convinced that this M12 distributor will become your first choice for equipment operation and maintenance. The integrated junction box can be produced with cables according to the length of on-site wiring. The cables have flexible and fixed installation options, and the length can also be customized as needed.。
Split junction box
The M12 junction box can concentrate the scattered IO points of various types of equipment and use multi-core cables to manage the connection of the control system, which facilitates management and line arrangement. In order to clearly display the operating status of the equipment, the M12 junction box is equipped with an LED display so that users can quickly obtain equipment operating data. We believe that this M12 distributor will become your first choice for equipment operation and maintenance. The split junction box can be separated from the integrated multi-core cable according to the on-site wiring environment or the need for quick component replacement, and the signal connection is realized through docking and locking.。
Power distribution box
7/8-inch interface power distribution box, specially designed for fieldbus sites. The device is equipped with common 4-pin and 5-pin interfaces, and you can choose different port numbers according to your needs, including 4-port and 8-port models for you to choose from; this power distribution box has an efficient power distribution function, which can effectively distribute power to each device to ensure the stable operation of the entire system. Its unique design and high-quality materials ensure reliability and stability for long-term use.
M8 connectors&cables
M8 connector
。
M8 panel connector
。
M8 tee connector
。
M8 single ended molding cable
。
M8 double ended molding cable
。
M12 connectors&cables
M12 connector
。
M12 flange socket
。
M12 tee connector
。
M12 single ended molding cable
。
M12 double ended molding cable
。
7/8”connectors&cables
7/8 connector
。
7/8 panel connector
。
7/8 tee connector
。
7/8 single ended molding cable
。
7/8 double ended molding cable
。
Ethernet connectors&cables
Multi-protocol
。
EtherCat protocol
。
Profibus protocol
。
Ethernet protocol
。
AS-i protocol
。
Modbus-RTU 485 protocol
。
CC-Link protocol
。
Valve plug cable
The use of valve plug pre-cast cables improves quick connections in the field. Since the precast cable has been configured with a plug matching the solenoid valve in advance, the connection can be completed by simply plugging and unplugging during installation, eliminating the need for tedious steps such as stripping and wiring on site, greatly saving installation time. In addition, the sealing performance of precast cables is better, which can effectively prevent impurities and moisture from entering the connecting parts, improving the stability and reliability of the equipment.
Cable
Fuyansheng Electronics can provide a wide range of bulk cables of the same high quality as our prefabricated cables. This service allows our customers to purchase the required lengths when needed, packed in cable reels, with a minimum meter length of 100 metres.
Accessory
Connectors and cable fixing brackets, plugs and marking sleeves play an important role in the connection and maintenance of electronic equipment. Reasonable selection and use of these accessories will help improve the stability and reliability of the equipment, and also facilitate the work of management and maintenance personnel. In the future development, with the continuous updating of electronic equipment and technological advancement, these accessories will continue to be improved and innovated to meet the increasingly complex device connection needs.
Cabinet and Wiring
Interface socket
Front panel multi-interface
The front panel is uniquely designed and integrates a variety of interface options to provide you with greater convenience! These interfaces include but are not limited to power interface, USB interface, RJ45 network interface and D-sub interface. This means that whether it is power supply or data communication needs, our products can meet them!。
Front panel single interface
Single USB and RJ45 network interface device brings you the best fast connection solution for field communication. It is convenient and practical and can meet various needs. Our equipment is precision designed to have strong stability and reliability, and can operate stably in various environments.。
D-Sub Connector
With the development of technology and changes in market demand, many electronic products have adopted the more convenient and easy-to-use D-Sub interface as a connection port. While ensuring excellent performance, this product also has extremely high compatibility and adaptability. It is widely applicable to various systems and equipment, providing users with diverse matching options to meet individual needs.。
KBL openable series
KBL threading board frame
KBL series frames are available in a wide range of specifications, so no matter how many cables you need to connect, you can find an installation solution that suits you. In addition, this series of frames is also compatible with a variety of sealing modules (such as KT sealing module, KTP sealing module, KTB sealing module and DT sealing module), providing you with more choices. For your convenience, we have also launched a quick installation base suitable for KBL series frames. Installation can be easily completed in just a few simple steps, greatly saving your time and energy.。
KT sealing module (small)
。
KT sealing module (large)
。
KTP seal module (small)
。
KTB sealing module (large)
。
DT seal module (large)
。
ST module plug
。
KBL quick installation base
The KBL quick-installation base can be matched with the KBL frame and can be easily snapped into the KBL frame during control panel, cabinet or machine installation. Ideal for cases that require extensive maintenance or those that require subsequent installation.。
KBL brushed cable entry plate
This dust-proof sealing brush plate can be flexibly adjusted according to actual needs, which greatly improves the convenience of installation and maintenance, and is also extremely cost-effective. If you are looking for a cable entry solution that is both practical and beautiful, then this dust-sealed brush plate is definitely worth your while!
KBL-QVT series
KDL openable series
KDL threading board frame
KDL series wiring boards are mainly suitable for occasions with a small number of lines. They are equipped with KDT/Z seals and are suitable for on-site use of pre-cast or connected cables.。
Cabinet installation parts
。
KDT/Z seals
。
KDP direct plug-in series (square type)
KDP direct plug-in series (round type)
KPL peeling series
KPL peel-off series components
。
PM stripping module
。
KML peeling series
KML peel-off series components
。
CM stripping module
。
SF customized high protection series
Heavy Duty Connector
Standard kit
。
ｉｎｓｅｒｔ
。
HM module connector
。
ｉｎｓｅｒｔ guide rail installation
。
Shell
。
Cable Gland
。
Tool
。
Plug for Pneumatic module
。
Pin
。
Industrial LED lighting
24V DC series LED lamp body
。
220V AC series LED light body
。
LED lighting accessories
。
Cable management system
Cable management board
。
EMC cable shield clamp
。
Color zinc wire clip
。
Guide
。
IIOT
en接近传感器
en压力传感器
enIP67网络模块
Case
Logistics sorting solutions
Fuyansheng's digital and IOT solutions are committed to improving the operational efficiency and processing speed of the entire logistics system. Automation upgrades in manual, material transfer, storage and monitoring, sorting, grading and other operations can reduce costs and reduce the probability of errors, and improve market competitiveness.
3C industry solutions
Fuyansheng's products and services have been widely and deeply used in electronic communication devices such as mobile phones, tablet computers, and various personal computers. It cleverly combines pneumatic control technology with efficient Ethernet technology to provide global customers with a complete range of compact valve island control systems and integrated IO-control systems for 3C equipment (computers, communications and consumer electronics). Link technology solutions.
Solutions for the Food Packaging Industry
In the food industry, whether it involves beverage manufacturing or meat and dairy processing, safe, reliable and robust production processes are always at the core of our pursuit. To prevent potential risks, we need to make production as sustainable as possible. At the same time, with the growing market demand for flexibility and modular features, it is even more critical for us to grasp cutting-edge technology. Therefore, the introduction of IO-Link technology will significantly help us move into the future in the most efficient way.
Metal processing solutions
Promote the development of the machine tool manufacturing industry in a more intelligent and digital direction, while also actively fulfilling corporate social responsibilities and pursuing a path of sustainable development. The application scope of our products includes but is not limited to hydraulic devices, precise and efficient control cabinets and precision conveying systems.
Solar photovoltaic solutions
In response to the huge demand in the current photovoltaic market, we are honored to provide you with a complete set of gas-electricity integrated connection solutions, thereby helping the photovoltaic industry achieve higher efficiency and better quality production operations.
Solutions for the Maritime Shipbuilding Industry
Ships and Shanghai drilling platforms have extremely high standards and requirements for the sealing of cable wiring. In order to meet these stringent demands, Fuyansheng Company has specially developed and launched a cable entry system product, which can effectively improve the quality and performance of sealed wiring.
Connection scheme for construction machinery
Signal connections and wiring path sealing in mobile operating equipment are undoubtedly confusions faced by many manufacturers and users. In order to solve this problem, Fuyansheng Company uses its high-efficiency quick connectors and complete cable entry systems. Provide customers with a comprehensive range of cabling path connection solutions.
Automotive industry solutions
Whether it is the four core manufacturing processes of the entire automobile, or the production and processing equipment of various key parts and components supporting the automobile, we have a wealth of complete lines for the extremely high efficiency, precision, and standards required for signal integration. solution.
Lithium battery manufacturing automation solutions
Regarding technical support in the battery manufacturing field, our company provides comprehensive and efficient automation solutions. We are committed to intelligently connecting battery equipment to effectively reduce human resource costs, improve production efficiency, and ensure that each of our production lines can meet strict quality control standards.
Support
Download support
Selection catalog
Industrial Ethernet Series
。
Pneumatic Product Series
。
In-cabinet product series
。
CC-Link IEF Basic Network module
。
Modbus-TCP Network module
。
Modbus-RTU
。
Connectors & Cables
。
Front debug panel
。
Industrial LED Lighting
。
Heavy duty connector
。
Industrial network
。
Pneumatic technology
。
Connection technology
。
Cable management
。
Specifications
IO-Link technology
。
Heavy duty connector
。
Cable management system
。
Connection technology
。
Manual
Please be sure to refer to the operating instructions to take full advantage of the product's excellent features. If you have any questions or suggestions, please feel free to contact our customer service team. Let us work together to create a better future.
Setup software
Excellent setting software, you can quickly adjust to the best condition with just a few clicks. Explore the unknown, enjoy high efficiency, and start a new work or lifestyle, all in this extremely smooth, simple and exquisite software.
Configuration data
IO-Link Master
。
Multi-protocol network module
。
PROFINET network module
。
EtherCAT network module
。
Profibus-DP network module
。
Product 3D
Increasing manufacturing companies have begun to use computer-aided design (CAD) tools for production process planning and product structure design, and the CAD text format files generated by these advanced tools are also widely used in various production links.
EPLAN
Providing you with EPLAN's EDZ files facilitates the quick import and export of configurations, achieving seamless integration between electrical design software and hardware. This effectively prevents errors in electrical software and hardware interfaces.
IODD
These include: communication characteristics, device parameters with precise value ranges and default status settings, identified, interpreted and diagnostic data, device data, detailed text descriptions, visual device schematics and the manufacturer's proprietary logo.
Certificates
CE Certificate
。
UL Certificate
。
Test Report
。
ROHS Certificate
。
3C explosion-proof certificate
。
ISO9001 quality management system certificate
。
Product 2D
Compared with traditional two-dimensional design, 3D digital simulation software presents more intuitive and complete design renderings, and supports realistic three-dimensional simulation testing, which greatly reduces production costs and later modification risks.
Product service
Technical Support
Our company is committed to providing you with comprehensive and highly professional technical support services. No matter what kind of problems or confusion you encounter during the use of our products, we will do our best to assist you in solving them to ensure that you can get an unparalleled use experience and satisfaction.
Selection software
Professional-grade selection tools are designed to improve your ability to realize your needs in the design field, and you can easily find the products and product order numbers that best suit your design requirements. Our intelligent algorithm will provide you with corresponding recommendation results based on your specific parameters.
FAQ
IO-Link Master
IO-Link slave
IO-Link analog
IO-Link valve terminal adapter
Multi-protocol network module
EtherCAT network module
PROFINET network module
PROFIBUS-DP
Modbus-RTU network module
CC-Link network module
FCC series blade modules
FAS-MS series: unmanaged switch
FIS M Series: RFID System
FV series: valve island
IO-Link knowledge
IIOT
News
Corporate News
In order to better meet and exceed your expectations, we always adhere to the field of information update and strive to show you the most complete and detailed operating status of our company with the greatest sincerity, hoping to provide you and others with this The most accurate information for partners and investors.
Product Information
To ensure you stay informed about our product updates, we'll prioritize publishing through the company's media platform and exhibitions. This aims to provide valued users with comprehensive product information and real-time updates.
Online video
Industrial Network
Network configuration
Hardware configuration
Cabinet wiring
IIOT
en电磁阀
enIO-Link
en重载连接器
Pneumatic technology
Auto industry
Food and beverage
Lithium battery equipment
3C industry
Metal processing
Other
en包装
en生命科学
Connect Technology
Network configuration
Connector operation
en工业通信
。
en气动
。
en传感器
。
en连接技术
。
en柜体布线
。
Connection technology
Partners
Become an X+ Partner
Partner qualification inquiry
Contact
About
en平台软件
Language
Product
Industrial Network
IO-Link Master
IO-Link device
Multiprotocol I/O module
PROFINET I/O module
EtherCAT I/O module
Profibus-DP I/O module
Modbus-RTU I/O module
Industrial switch
enFFC系列刀片式模块
enIP20网络模块
enRFID
Pneumatic tech
Valve Island
The Solenoid valve
Communication modules
Valve island accessories
Magnetic sensor
Electric and Pneumatic
en阀与阀组
en标准阀岛
en组合式阀岛
en非标阀岛
en比例阀
Connection Tech
M8 signal junction box
M12 signal junction box
Power distribution box
M8 connectors&cables
M12 connectors&cables
7/8”connectors&cables
Ethernet connectors&cables
Valve plug cable
Cable
Accessory
Cabinet and Wiring
Interface socket
KBL openable series
KBL brushed cable entry plate
KBL-QVT series
KDL openable series
KDP direct plug-in series (square type)
KDP direct plug-in series (round type)
KPL peeling series
KML peeling series
SF customized high protection series
Heavy Duty Connector
Industrial LED lighting
Cable management system
IIOT
en接近传感器
en压力传感器
enIP67网络模块
Case
Logistics sorting solutions
3C industry solutions
Solutions for the Food Packaging Industry
Metal processing solutions
Solar photovoltaic solutions
Solutions for the Maritime Shipbuilding Industry
Connection scheme for construction machinery
Automotive industry solutions
Lithium battery manufacturing automation solutions
Support
Download support
Selection catalog
Specifications
Manual
Setup software
Configuration data
Product 3D
EPLAN
IODD
Certificates
Product 2D
Product service
Technical Support
Selection software
FAQ
IO-Link Master
IO-Link slave
IO-Link analog
IO-Link valve terminal adapter
Multi-protocol network module
EtherCAT network module
PROFINET network module
PROFIBUS-DP
Modbus-RTU network module
CC-Link network module
FCC series blade modules
FAS-MS series: unmanaged switch
FIS M Series: RFID System
FV series: valve island
IO-Link knowledge
IIOT
News
Corporate News
Product Information
Online video
Industrial Network
Network configuration
Hardware configuration
Cabinet wiring
IIOT
en电磁阀
enIO-Link
en重载连接器
Pneumatic technology
Auto industry
Food and beverage
Lithium battery equipment
3C industry
Metal processing
Other
en包装
en生命科学
Connect Technology
Network configuration
Connector operation
Connection technology
Partners
Become an X+ Partner
Partner qualification inquiry
Contact
About
en平台软件
en阀
Home
>
Product
>
Pneumatic tech
>
en组合式阀岛
>
en阀
en阀岛通信模块
Feature
en阀
Feature
en阀岛附件
Feature
请选择区域或语言
简体中文
繁體中文
English
Nederlands
Français
Русский язык
Polski
日本語
ภาษาไทย
Deutsch
Português
español
Italiano
한어
Suomalainen
Gaeilge
dansk
Pilipino
Ελληνικά
Slovenská
Magyar
Azərbaycan
IndonesiaName
Lietuva
Svenska
Türkçe
