what is IO-Link?

2023-09-28 11:22   240

IO-Link Overview

IO-Link is the first standardised IO technology worldwide (IEC 61131-9) for the communication with sensors and also actuators. The powerful point-to-point communication is based on the long established 3-wire sensor and actuator connection without additional requirements regarding the cable material. So, IO-Link is no fieldbus but the further development of the existing, tried-and-tested connection technology for sensors and actuators.

The system architecture could look as follows:

Dummy Bild. Klicken zum Ersetzen

Example of system architecture


Universal - IO-Link always fits!


  • IO-Link is fieldbus independent and can be integrated into all fieldbus systems worldwide.

  • IO-Link relies on standards such as M12, M8 or M5 connectors and three-wire cables.

  • IO-Link is an international standard according to IEC 61131-9.

  • IO-Link is universal ... and ... always fits!


Smart - IO-Link eases your work!


  • IO-Link is functional and enables an extended diagnosis of sensors and actuators or simple and fast parameter setting due to birectional communication.

  • IO-Link is fast, with its three communication speeds of 4.8 kBaud,38.4 kBaud and 230.4 kBaud.

  • IO-Link is small and enables the miniaturisation of "intelligent" sensors and actuators

  • IO-Link is smart … and … eases your work!


Easy - IO-Link knows what's going on!


  • IO-Link is reduced; easiest wiring with an unscreened three-wire cable enables bidirectional communication with extensive diagnosis and parameter setting.

  • IO-Link is automated because parameter data on a server enable the decentralised parameter setting of devices in shortest time.

  • IO-Link is helpful, because simple remote maintenance of devices is possible via the bidirectional communication.

  • IO-Link is easy ... and ... knows what's going on!

Note: This article comes from the IO-Link Association